Looking to conserve water and lower your bills? Harness the power of nature with Taylex’s Rainwater Tanks, expertly crafted to harvest, store, and utilise rainwater efficiently..
Our cutting-edge rainwater tanks offer a sustainable and cost-effective alternative to traditional water sources for residential and commercial properties. Made from high-quality concrete, our tanks can withstand fire, heat, and ground movement, acting as natural insulators to keep stored water cool and algae-free.
Taylex Tanks are built heavier and stronger than other brands, contain more concrete, and are cyclone-rated. With advanced filtration and customisable designs, we help you make the most of every drop, reducing your environmental footprint while ensuring a continuous supply of clean, safe water.
Trust Taylex for your rainwater management needs.
The bases of our tanks are thicker to withstand the pressures of ground movement and the weight of water.
The walls, lids and bases are reinforced with F72 and F41 steel mesh.
The walls of our tanks taper inwards from the top to the bottom so that there is more strength in the bottom of the walls where it’s needed.
Naturally occurring minerals balance the PH levels of stored water, neutralising acidity. Water becomes alkaline, healthier for consumption.
The walls of our tanks taper inwards from the top to the bottom so that there is more strength in the bottom of the walls where it’s needed.
Light trafficable lid. 2 tonnes point load. Car traffic only. Not rated for trucks.*Invert/Overflow Depth taken from Bottom of tank lid to the bottom of pipe.
Heavy trafficable lid. 9 tonnes Wheel load. Car & Truck traffic. *Invert/Overflow Depth can be customised to suit site requirements; contact Taylex for more information.
*Customisable
RW22T44
Approximately 300mm – 500mm should be above ground level. Suitable for all tanks.
Tank to be placed on a boxed or sunken pad of 5mm-7mm gravel, 100mm deep.
Taylex Rainwater Tanks are not retaining walls. A flat, level area larger than the tank on all sides will need to be cut before the tank can be installed.
Tanks can be buried underground, with only an inspection hole visible at ground level. Only suitable for Heavy Duty and W80 Tanks.
Discover more about Taylex with our most frequent questions.
